康泰电子

您的位置:首页>> 产品中心>> 工业控制>> WRC 工业控制产品>> 软件
WRC DNspector™ 软件
产品型号:DNspector
WRC DNspector™ Software Utility
产品名称:WRC DNspector™ Software Utility

资料下载:暂无

产品描述:DNspector is a low cost solution to monitoring and troubleshooting DeviceNet and J1939 networks in the field or lab. Utilizing a USB cable with a CAN-bus dongle, DNspector allows any computer with a USB port running Windows XP, Windows2000, or Vista to become a DeviceNet tool. The USB cable with CAN dongle is included with the software.
WRC provides feature-rich utility software to facilitate DeviceNet implementation by all users: product developers, OEMs, integrators, and the end user.
Key features include:
• DeviceNet, J1939, CANopen, FullCAN (29-bit) compatible. • Full interpreter for DeviceNet messages.
• Numeric display available in both DeviceNet and J1939 network mode.
• No interference with network under surveillance.
• Rockwell Point I/O compatible.
• Unlimited Logging capability limited only by the room available on the hard disk.
• Capture feature for temporary review of messages.
• Easy to use Message Sending dialog. Allows fragmented message generation using a special Dialog box, which can be saved and loaded from a file.
• Browse Network and Get Identity information with connection sizes.
• Network to be monitored may be predefined using EDS files and poll sizes altered using the Network Assign dialog. Stored in Net Config files.
• Extensive message filtering for logging and capture, and searching. Easy to use Filter Editor that generates inclusive or exclusive filters.
• Log and Capture search capability using the above filters.
• Predefined CAN baud rate singular selection: 125k, 250k, 500k for DeviceNet; or 10k, 20k, 40k, 50k and 100k for J1939; or customized baud rate selection using BTR0 & BTR1.
• Network Setup dialog allows control of delay of message sending to allow browsing of slower devices
 

 

 

  版权所有 © 北京康泰电子有限公司 1994~2011, 保留所有权利